Ambit U10C035 Průvodce řešením problémů stáhnout pdf (Strana 14)

| Ubee Interactive 2011

WEP

WEP encryption is disabled by default. Recommend

leaving WEP disabled since it is not secure or efficient.

WPS

Enabled by default, but recommend disabling it due to

inconsistent wireless client implementations.

3.4 WIRELESS  WIRELESS RADIO

Label

Description

Wireless Interfaces

Displays the Wireless name / MAC address.

Wireless

Displays the wireless radio’s status, Enabled or Disabled.

Country

Select UNITED STATES

Output Power

Always Select 100%

802.11 Band

You can choose 2.4Ghz or 5 Ghz, not both

concurrently. ALL wireless client adapters MUST

support 5GHz, if you decide to use 5GHz only.

Note: The distance and coverage for 5Ghz is less than

2.4Ghz, but because there (currently) tend to be fewer

5GHz Wireless Access Points, this may be an option.

802.11 n-Mode

Select Auto to use 802.11 n mode when possible. This

mode has a significant increase in the maximum raw OSI

physical layer data rate from 54 Mbit/s to a maximum of

600 Mbit/s with the use of four spatial streams when at a

channel width of 40 MHz.

One spatial stream at 20MHz wide channel will enable

72.2Mbps maximum data rate in 802.11n mode.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 33 34

Žádné komentáře

Ambit U10C035 Průvodce řešením problémů Strana 14